1. Determine the intended tire inflation
pressure levels for the mounted tires.
2. Check the tire inflation pressure in all
four tires, using a pressure gage, for ex-
ample.
3. Correct the tire inflation pressure if the
actual tire inflation pressure deviates
from the intended tire inflation pres-
sure.
4. Check whether all valve caps are
screwed onto the tire valves.
After correcting the tire pressure
For flat tire monitor: reinitialize flat tire
monitor.
For Tire Pressure Monitor: reset the Tire
Pressure Monitor.
Checking the tire inflation pressure of
the emergency wheel
Located behind the bumper on the under-
side of the vehicle is an opening for check-
ing the tire inflation pressure.
Tire pressures up to 100 mph/
160 km/h
For speeds of up to 100 mph/160 km/h
and for optimum driving comfort, note the
pressure values in the tire pressure table,
refer to page 251, and adjust as necessary.
These pressure values can also be found on
the tire pressure label on the driver's door
pillar.
Do not exceed a speed of 100 mph/
160 km/h.
Tire pressure values up to
100 mph/160 km/h
On 3-door models: COOPER
Tire size Pressure specifica-
tions in bar/PSI
Specifications in
bar/PSI with
cold tires
195/55 R 16 87
V A/S
195/55 R 16 87
W
195/55 R 16 87
H M+S
2.2 / 32 2.2 / 32
Seite 251
Wheels and tires MOBILITY
251
Online Edition for Part no. 01405A7DAD4 - II/23
To Next Page
Loading...
Need help?
General
