pressor and attach it in the visible area
in the vehicle interior.
– Remove the warning label from the tire
sealant bottle and attach it to the rim.
Preparing the tire repair set
1. Insert the sealant bottle into the mount
on the housing of the compressor.
2. Turn the sealant bottle clockwise by 90°
to the stop.
3. Connect the filler hose to the outlet of
the sealant bottle and turn clockwise by
90° to the stop.
4. Unscrew the valve cap from the wheel
and screw the connecting piece of the
filler hose onto the valve.
5. With the compressor switched off, in-
sert the connector into the power socket
in the vehicle interior.
Filling the tire with sealing
compound
Safety information
DANGER
If the exhaust pipe is blocked or ventila-
tion is insufficient, harmful exhaust gases
can penetrate the vehicle. The exhaust
gases contain pollutants which are color-
less and odorless. In enclosed areas, ex-
haust gases can also accumulate outside of
the vehicle. There is a danger to life. Keep
the exhaust pipe free and ensure sufficient
ventilation.
NOTICE
The compressor can overheat during ex-
tended operation. There is a risk of dam-
age to property. Do not run the compres-
sor for more than 10 minutes.
Filling the tire with sealing compound
1. With standby state or drive-ready state
switched on, switch on the compressor.
Seite 263
Wheels and tires MOBILITY
263
Online Edition for Part no. 01405A7DAD4 - II/23
To Next Page
Loading...
Need help?
General
