Adjusting the height
– To lower: press the button, arrow 1, and
push the head restraint down.
– To raise: push the head restraint up.
After setting the height, make sure that the
head restraint engages correctly.
Fold down
– To fold down: press the button, arrow 1,
and press down the head restraint, ar-
row 2.
– Forward: fold the head restraint toward
the front as far as it will go. Make
sure that the head restraint engages cor-
rectly.
Removing
Only remove the head restraint if no one
will be sitting in the seat in question.
1. Fold down the rear seat backrest, refer
to page 229, in question.
2. Pull head restraint up against the resist-
ance.
3. Press the button, arrow 1, and pull the
head restraint out completely.
Installing
Proceed in the reverse order to install the
head restraint.
Mirrors
Exterior mirrors
General information
The front passenger's side exterior mirror is
more curved than the driver's side mirror.
Safety information
Warning
Objects reflected in the mirror are closer
than they appear. The distance to the
road users behind could be incorrectly es-
timated, for instance while changing lanes.
There is a risk of accident. Estimate the
distance to the traffic behind by looking
over your shoulder.
Seite 87
Seats, mirrors and steering wheel CONTROLS
87
Online Edition for Part no. 01405A7DAD4 - II/23
To Next Page
Loading...
Need help?
General
