Overview
1 Adjusting
2 Selecting a mirror, Automatic Curb Mon-
itor
3 Folding in and out
Selecting a mirror
To change over to the other mirror:
Slide the switch.
Adjusting electrically
Press the button.
The mirror movement follows the
button movement.
Malfunction
In case of an electrical malfunction, adjust
the mirror by pressing the edges of the mir-
ror glass.
Automatic heating
Both exterior mirrors are automatically
heated as needed and when the ignition is
switched on.
Automatic dimming feature
The exterior mirror on the driver's side
is automatically dimmed. Photocells in the
car's interior mirror, refer to page 89, are
used to control this.
Automatic Curb Monitor
Principle
If reverse gear is engaged, the mirror glass
on the passenger's side is tilted downward.
This improves your view of the curb and
other low-lying obstacles when parking,
for instance.
Activating
1.
slide the switch to the driver's
side mirror position.
2. Engage selector lever position R.
Deactivating
Slide the switch to the front passenger's
side exterior mirror position.
Interior mirror, manually dimmable
Flip lever
To reduce the blinding glare of the interior
mirror, flip the lever forward.
Seite 88
CONTROLS Seats, mirrors and steering wheel
88
Online Edition for Part no. 01405A7DAD4 - II/23
To Next Page
Loading...
Need help?
General
