Locking the seat belt
1. Pull out the belt strap completely.
2. Secure the child restraint system with
the seat belt.
3. Allow the belt strap to be pulled in and
pull it tight against the child restraint
system. The seat belt is disabled.
Unlocking the seat belt
1. Unbuckle the seat belt buckle.
2. Remove the child restraint system.
3. Allow the belt strap to be pulled in com-
pletely.
LATCH child seat mountings
General information
LATCH: Lower Anchors and Tether for Chil-
dren.
Pay attention to the operating and safety
information from the child restraint system
manufacturer when installing and using
LATCH child restraint fixing systems.
Mounts for the lower LATCH
anchors
General information
The lower anchors may be used to attach
the CRS to the vehicle seat up to a com-
bined child and CRS weight of 65 lbs/
30 kg when the child is restrained by the
internal harnesses.
Safety information
Warning
If the lower mountings of the child re-
straint system are not correctly engaged,
the protective effect of the child restraint
system is limited. There is a risk of injury
or danger to life. Make sure that the lower
mountings are correctly engaged and that
the child restraint system fits securely
against the backrest.
Warning
The mounts for the lower mountings and
attachment points of the child restraint
system are intended for attaching child re-
straint systems only. If other objects are
attached, the mounts or attachment points
can be damaged. There is a risk of injury
or risk of damage to property. Only attach
child restraint systems at the correspond-
ing mounts for the lower mountings or at-
tachment points.
Seite 94
CONTROLS Transporting children safely
94
Online Edition for Part no. 01405A7DAD4 - II/23
To Next Page
Loading...
Need help?
General
