Need help?Do you have a question about the Minipa MT-350 and is the answer not in the manual?
General| Type | Infrared Thermometer |
|---|---|
| Power Supply | 9V Battery |
| Dimensions | 160 x 100 x 45mm |
| Resolution | 0.1°C |
| Display | LCD |
| Battery Type | 9V |
| Emissivity | Fixed at 0.95 |
| Auto Power Off | Yes |
Details general specifications including display, low battery indication, sensor cover, measurement rate, and environment.
Covers laser safety classification, wavelength, operating distance, and output power for the device.
Outlines electrical specifications including temperature range, display resolution, accuracy, and response time.
Explains the basic steps for operating the thermometer, including trigger use and measurement.
Guides users on how to scan an area to find the hottest point for accurate temperature readings.
Details how to ensure the object measured is larger than the spot size for accurate results.
Explains the principle that objects emit infrared energy proportional to their temperature.
Defines infrared radiation as light that passes through air but is absorbed by solid matter.
Describes the optical system, sensor, filter, and electronic circuits used in the thermometer.
Explains emissivity as an object's ability to emit IR energy based on material and surface finish.
Provides advice on measuring surfaces with frost, high reflectivity, or obstructed sensors.
Lists emissivity values for various common substances like asphalt, concrete, and glass.
Provides step-by-step instructions for replacing the 9V battery when the low battery indicator appears.
Recommends cleaning the housing with a damp cloth and mild detergent, avoiding abrasives.
To Next Page