To Next PageTo Next Page
Need help?Do you have a question about the Minipack-Torre FM76A Digit and is the answer not in the manual?
General introduction to the machine and manufacturer.
Details the machine's dual function (sealing/shrinking) and output.
How to identify the machine model and serial number for support.
Specifications for the machine's dimensions when packed.
Specifications for the machine's overall dimensions.
Instructions for safely moving and placing the machine.
Specifies the required ambient temperature, humidity, and protection rating.
Details grounding requirements and voltage checks before electrical connection.
Procedure to verify and set the correct motor rotation direction.
Overview of controls, indicators, and program selection.
Description of the 6 available programs and their features.
Details the 6 programmable variables for each program and their ranges.
Step-by-step phases for machine setup and operation.
Displays error codes and potential causes for machine anomalies.
How to operate the machine in manual or automatic modes.
Instructions for loading the film roll onto the machine.
How to adjust the height of the conveyor belt for optimal packaging.
Adjusting guides for the film and product based on width.
Procedure for performing the first welding operation on the film.
How to couple film strips for continuous operation.
Instructions for connecting and starting the smoke exhauster.
How to place the product into the film before packaging.
Steps to initiate the packaging cycle and how the machine operates.
Specifies the maximum dimensions for packaged items.
Conditions to avoid during packaging to prevent damage or poor results.
Lists items that must absolutely not be packaged due to risks.
Recommends specific film types and thicknesses for optimal performance.
Formula for calculating film band width based on product dimensions.
Essential safety rules and precautions for operating the machine.
Warnings about touching the hot sealing blade and handling blade breakage.
Warnings about touching the hot chamber flap and the moving conveyor belt.
Procedures for power interruptions and ensuring proper seating of rubber feet and film rolls.
Safety steps before performing any maintenance, including switching off the machine.
How to clean and periodically lubricate the sealing blade.
Instructions for removing film scraps from hot parts and changing film rolls.
How to clean the machine, including specific advice for dusty environments.
How to check and top up the cooling liquid level.
Procedure for replacing worn rubber and Teflon parts.
Instructions for adjusting the machine's cams, requiring authorized personnel.
Detailed steps for replacing the sealing blade.
Schematic diagram of the machine's electrical connections.
Legend explaining the symbols and components in the wiring diagram.
List of available spare parts with codes and descriptions.
Safety instructions and procedures for machine disassembly and waste disposal.
Instructions on how to fill out and send the guarantee certificate.
Details the terms, duration, and voiding conditions of the warranty.
General| Brand | Minipack-Torre |
|---|---|
| Model | FM76A Digit |
| Category | Packaging equipment |
| Language | English |
