- 10 -
Ethernet jack
Connect to the Ethernet cable for Internet access. If you need advanced
setting such as PPPoE dial-up, go into the setting page at: Settings ->More…
While connected with the Ethernet cable, MINIX NEO X5 can be used
as a router and also a Wi-Fi hotspot; if you need to use the Wi-Fi
hotspot feature, please make sure that the Wi-Fi feature is OFF before
you enable the Wi-Fi hotspot service at: Settings ->More…
DC 5V Power-in jack
Connect the 5V power adapter supplied in the package to this port.
MINIX NEO X5 requires less than 1A to operate however we have
supplied a 5V 3A adapter with consideration that you need to connect to
other power-drawing external devices such as an external hard drive.
To Next Page
Loading...