7
Step 1. Tuck connections neatly into ceiling outlet box.
Step 2. Slide the canopy up to ceiling and over the two screws on hanger bracket. Rotate canopy
clockwise, next, while holding the canopy with one hand, slide the canopy cover over the screws
and rotate clockwise until tight.
Note: Adjust the canopy screws as necessary until the canopy and canopy cover are snug. (Fig. 16)
Fig. 16
FINISHING THE INSTALLATION
OUTLET BOX
HANGER
BRACKET
HANGER
BALL
CANOPY
CANOPY
COVER
To Next Page
Loading...
