To Next PageTo Next Page
Need help?Do you have a question about the MINN KOTA MK220 and is the answer not in the manual?
General| Brand | MINN KOTA |
|---|---|
| Model | MK220 |
| Category | Battery Charger |
| Language | English |
This manual contains crucial safety and operating instructions for the proper use of your Minn Kota battery charger.
Working near lead-acid batteries is dangerous due to sulfuric acid and explosive gases. Follow all instructions carefully.
Consider having someone nearby, keep water/soap handy, wear protective gear, and avoid touching eyes when working with batteries.
Steps include cleaning terminals, adding distilled water, and studying manufacturer precautions before charging.
Ensure correct battery type (12V 6-cell lead acid), polarity, and connection procedures for safe operation.
Proper grounding and direct connection to a grounded receptacle are essential to reduce shock and fire risk.
Mount charger flush in a protected area, away from rain/spray. Avoid mounting above batteries or near fuel tanks.
Securely mount the charger using bolts, nuts, and washers. Use the largest diameter bolts possible for stability.
Follow steps to connect batteries, ensuring correct polarity and order to prevent sparks and battery explosion.
Learn the meaning of GREEN, YELLOW, and RED indicator lights for charging status, battery issues, and errors.
Each output cord has inline fuses for surge and short circuit protection. Replace blown fuses with the correct type and rating.
Check charger and terminals for dirt, oil, and corrosion. Clean with water and baking soda solution. Coil cord when not in use.
Table detailing model numbers, system volts, banks, output, cable size, weight, and input current for various chargers.
Information regarding EU Directive 2002/96/EC for waste electrical and electronic equipment disposal.
Details the three-year limited warranty, exclusions, and procedures for obtaining warranty service in the U.S. and Canada.
