Need help?Do you have a question about the MINN KOTA POWERDRIVE V2 and is the answer not in the manual?
General| Mount Type | Bow Mount |
|---|---|
| Motor Type | Electric |
| Voltage | 12V or 24V |
| Speed Control | Variable |
| Digital Maximizer | Yes |
| Speed Settings | 5 forward, 3 reverse |
| Battery Requirement | 12V or 24V deep cycle marine battery |
| Control Type | Foot Pedal |
| Weight | Varies by model |
| Warranty | 2 years |
| Thrust | 55 lbs |
| Shaft Length | 48, 54, 60 inches |
| i-Pilot Link Compatibility | No |
Details critical safety advice for operating the trolling motor and its components.
Explains where to find the serial number and its significance for registration and service.
Covers defects in materials and workmanship for two years from purchase date.
Guarantees the composite shaft against material and workmanship defects for the owner's lifetime.
Lists conditions and uses not covered by the limited warranty.
Provides procedures and contact details for obtaining warranty service.
Describes components like depth collar, deploy-assist lever, tilt lock, foot pedal, and propeller.
Highlights features such as cool quiet motor and lifetime warranty composite shaft.
Lists the necessary tools and materials for installing the motor mount.
Step-by-step instructions for securely mounting the trolling motor on the boat.
Recommendations for rigging the boat and installing the motor per industry standards.
Technical table specifying wire gauges and breaker sizes for safe electrical connections.
Explanation of the motor's battery charge indicator and how to read it.
Guidance on choosing appropriate deep cycle marine batteries for optimal performance and longevity.
Instructions for connecting batteries in 12V and 24V configurations.
Visual schematic illustrating the motor's electrical system and component connections.
Step-by-step guide for safely stowing and deploying the trolling motor.
Advice on how to secure the motor during transport to prevent damage.
Instructions for adjusting the latch collar for proper motor stowage.
Explanation of how to operate the AutoPilot for maintaining a set course.
Guide to properly setting the motor's depth for optimal underwater operation.
Instructions for installing an external sonar transducer onto the motor.
Describes momentary on/off and continuous run modes of the foot pedal.
Explains how to steer, adjust speed, and change motor thrust direction.
Advice for using the foot pedal on boat surfaces without carpeting.
Step-by-step instructions for removing and installing a new propeller.
Routine care instructions including rinsing, cleaning, and lubrication.
Addresses common problems like motor failure, power loss, vibration, and interference.
Provides access to FAQs, customer service, and authorized service centers.
Visual representation of all parts with numerical identifiers for assembly reference.
Comprehensive list of all motor parts with item numbers, quantities, and descriptions.
Information regarding environmental regulations and the WEEE directive for electronics.
Instructions for the proper disposal of the trolling motor and its battery.
Blank section for users to record personal notes and information.
Information on compatible battery chargers and the Talon shallow water anchor.
Listing of other available accessories to enhance motor functionality.
To Next Page