Need help?Do you have a question about the MINN KOTA TERROVA Series and is the answer not in the manual?
General| Voltage | 12V, 24V, 36V |
|---|---|
| Lift-Assist | Yes |
| Digital Maximizer | Yes |
| Weedless Wedge 2 Prop | Yes |
| Speed Settings | Variable |
| Blade Material | Composite |
| Control | Foot pedal |
| Steering | Electric |
| Spot-Lock | Yes |
| Type | Bow-Mount |
| GPS | Yes |
| Battery Requirement | Deep cycle marine battery |
| Thrust | 55 lb, 80 lb, 112 lb |
Instructions on how to register the trolling motor for warranty and service.
Explains the importance of the 11-character serial number for model and manufacture year.
Provides fields for recording motor model, serial number, purchase date, and store.
Details the process of installing the Terrova trolling motor onto a boat.
Provides recommendations for motor mounting location and clearances.
Lists the necessary tools and resources for installation.
Covers safety and compliance for boat wiring and rigging.
Provides a table for selecting appropriate conductor gauge and circuit breaker sizes.
Discusses important factors when connecting other electronics and accessories to the battery.
Warns about connecting jump start systems to the correct battery terminal.
Provides step-by-step instructions for connecting 12-volt batteries.
Details how to wire two 12-volt batteries in series for a 24-volt system.
Details how to wire three 12-volt batteries in series for a 36-volt system.
Wiring diagram for Terrova models factory-equipped with AutoPilot.
Wiring diagram for Terrova models with i-Pilot or i-Pilot Link.
Introduces and labels the key physical components of the motor.
Explains the function and use of the depth collar for setting motor depth.
Describes the function of the Fall Away Ramps in stowing and deploying the motor.
Explains the AutoPilot indicator light status on the mount.
Describes the location and function of the Stow Deploy Lever.
Explains how to use and interpret the push-to-test battery meter.
Guides on how to properly adjust the lower unit for secure stowage during transport.
Explains how to control motor speed and steering using the foot pedal.
Details the speed control knob and its range on the foot pedal.
Explains the Spot-Lock button, its function, and indicator light.
Details how to control steering direction and reverse thrust.
Explains Prop ON/OFF, Constant, and Momentary operation modes.
Details engaging/disengaging AutoPilot via the foot pedal.
Introduces the AutoPilot feature and its control methods.
Explains how AutoPilot uses a compass to maintain heading.
Details how to turn the AutoPilot feature on and off.
Describes the process of toggling the AutoPilot feature on and off.
Step-by-step guide for replacing the trolling motor propeller.
Provides guidelines for general cleaning, lubrication, and upkeep.
Lists common issues and their potential solutions for the trolling motor.
Outlines options for obtaining further troubleshooting and repair assistance.
States the company's commitment to environmental compliance and regulations.
Explains the Waste of Electrical and Electronic Equipment Directive.
Provides instructions for the proper disposal of the motor and batteries.
Details compliance with Industry Canada technical specifications.
Lists the ambient operating temperature, humidity, and altitude limits.
Recommends Minn Kota chargers for battery care and longevity.
Highlights the features of the Talon shallow water anchor.
Lists various accessories available for Minn Kota trolling motors.
To Next Page