38
FOCUS-AREA INDICATOR CONTROLS
The display of the focus-area indicator can be controlled with a custom function.
CUSt-1:1 - The focus-area indicator automatically appears when looking through
the viewfinder.
CUSt-1:2 - The focus-area indicator appears when the shutter-release button is
pressed partway down.
CUSt-1:3 - The focus-area indicator is canceled and will not be displayed.
1.Press and hold the AF mode button for
about two seconds until “CUSt-1” appears
on the top of the data panel.
• The number blinking in the frame-counter area is the
current custom setting. The initial setting is CUSt 1:1.
To Next Page
Loading...
