53
SELF-TIMER
1.With the camera on a tripod, press the
drive-mode button until the self-timer
indicator appears on the data panel.
2.Frame the subject as described in the
manual.
• Focus lock can be used with Area AF and spot AF.
•With target AF or when focus lock is not used, the
focus is set just before the exposure. Make sure the
subject is positioned inside the focus frames.
The self-timer is used for taking self-portraits. The self-timer delays release of
the shutter for approximately 10 seconds after the shutter-release button is
pressed.
Continued on next page.
ADVANCED OPERATION
To Next Page
Loading...
