70
VIEWFINDER BRIGHTNESS
The relative brightness of the AF frame or focus-area indicator can be adjusted.
The brightness of the frame lines will continue to adjust automatically in relation
to the new level.
1.Press and hold the AF mode button for about
two seconds until “CUSt-1” appears on the
top of the data panel.
• The number blinking in the frame-counter area is the
current custom setting.
2.Press the select button until “CUSt-2”
appears.
• The blinking number in the frame counter displays the
current brightness level. The initial setting is 3.
Brightness can be adjusted in five levels from 1 (low)
to 5 (high).
To Next Page
Loading...
