Minolta Auto Winder G - Caution

3. Insert
the battery holder
into the
winder body
so
that the white
marks
are
on th€
same side
and
snap
it
securely into
place.
(lt
is shaped
so
that it will not
seat
properly
if
the white marks
are not
on the same
side.)
CAUTION
o
When
replacing batteries,
be
zure
to change
all
four
batteries at one
time. lf €xhausted
batteries are
used with fresh
ones, or if differ-
ent
types of batteries
are
used
together, there
is a
possibility
of
battery
leakage
or explosion.
o
Do not
attempt
to charge
alkaline
or carbon-zinc
batteries
as this
could
cause battery
leakage
or
explosion.
o
lf the winder
is not
to
be
used
for
two weeks
or
more,
batteries
should be removed.
o
lf
Auto Electroflash
2OOX is to be
used
with
the XG
cameras
and
Auto Winder
G in
successive f
lash
operation,
be
sure to use
only
freshly
charged
Ni-Cd
batteries
in
the
f
lash.
lf
partially
charged
or
other batteries
are
used,
the
flash
may
not
synchronize
properly.