QUICK OPERATION
8 9
Insert the batteries.
• The camera uses one 2CR5 cell.
Attach a lens.
• Align the red marks, then turn it
gently clockwise until it clicks.
Turn the camera on.
• Set the main switch to ON.
Load the film.
• Line the film-tip with the red mark,
then close the back cover.
Set the camera to full-auto
operation.
• Press the program-reset button.
Turn eye-start on.
Frame the picture.
• Align your subject in the focus
frame and the camera will
automatically focus.
Take the picture.
• Gently press the shutter release
button all the way down.
2152EE 17/10/97 10:51 AM Page 8
To Next Page
Loading...
