4746
The twin flash unit has a coverage of 60° horizontally, and 45° verti-
cally (equivalent to a lens with a 35mm focal length). But by attach-
ing the wide-angle adaptor, the angles will be increased to 78° hori-
zontally and 60° vertically (equivalent to a lens with a 24mm focal
length).
WIDE-ANGLE ADAPTER (TWIN FLASH ONLY)
While holding the wide-angle adapter by its top tab, press it
against the face of the twin flash unit until it clicks and is
securely mounted.
• Remove the wide-angle adaptor while
holding its top tab.
• The flash output is reduced when using the wide-angle adapter. See
page 32 for TTL flash metering, or 43 for manual flash metering.
Place the adapter so that the
MINOLTA logo is readable.
With wide-angle adaptor Without wide-angle adaptor
Align the lower edge.
To Next Page
Loading...
