Minolta MAXXUM 3xi - Main Switch and Eye-Start

MAIN SWITCH/EYESTART
Main switch
Eyepiece Sensor
I
When you move the main switch to ON, the data panel and grip sensor ac¬
tivate. When you then touch the grip sensor, the eyepiece sensor is acti¬
vated. This sensor then immediately activates autofocus and autoexposure
when it detects an object near the viewfinder. If you are using an xi-Series
Autozoom lens, auto stand-by zoom (ASZ) is also activated by Eye-Start and
the lens will zoom automatically. By the time you frame your subject, there¬
fore, the camera has performed many of its set-up operations and is ready to
make an exposure. The eyepiece sensor also turns autofocus and auto¬
exposure off 4 sec. after it no longer detects an object near the viewfinder.
• If you do not touch the grip sensor or if you are wearing gloves, you must
activate autofocus and autoexposure by pressing the shutter-release button
partway down. ASZ will not function in this case.
® If you are wearing sunglasses which absorb infrared light, Eye-Start may
not function.
21