Turning the Audio Signal On
AUTOMATIC
OPERATION
28
AUDIO SIGNAL
Turn the function dial to .
While pressing the function
button, turn the control dial
until appears on the
data panel.
Canceling the Audio Signal
Turn the function dial to .
While pressing the function
button, turn the control dial
to .
1
Audio signal is initially on. The camera will produce an audio tone when :
• focus is confirmed.
2 short beeps
(Continuous AF (p. 73) does not use audio signals.)
• during the self-timer countdown.
will beep in unison with the self-timer lamp.
• Remote-control operation*
will give one short beep before the shutter releases with the release
button.
With the delayed-release button, the signal will beep rapidly for 1
second, and then sound a long tone just before the shutter releases.
*Remote-control is sold separately for owners of the remote-control model.
29
Turn the function dial to .
While pressing the function
button, turn the control dial
until appears on the
data panel.
• Eye-start may not work properly when using a tripod, wearing gloves, or if
your hands are very dry. In these cases, press the shutter-release button
partway down to activate the autofocus and metering systems.
• Infrared absorbing sunglasses may affect eye-start operation.
Custom Function Notes
Cust-7 : The grip sensor activates the eyepiece sensors (1), the main
switch activates the eyepiece sensors (2) (p.110).
Canceling Eye-start
2
1
EYE-START
2
1
2
To Next Page
Loading...
