7
Attention!
Please format the memory card before
using the camcorder.
Do not take out or insert the memory
card when recording. It may damage
the card or cause data loss.
1.3
Button Function Description
Hold the POWER button for 2 seconds to turn the power on/off.
Push the POWER button to turn the IR light on/off.
Press the MODE button to switch between Video, Photo and
Setup Mode.
Press the MENU button to bring up a mode specific menu.
When in Photo or Video mode, press the PLAYBACK button to
enter playback mode.
Press the PHOTO button, while in Photo mode to capture a still
image.
In Video mode, press the RECORD button to start/stop video
recording.
When in Photo or Video mode, slide the ZOOM button from left to
right to zoom in or out. When in PLAYBACK mode or browsing a
menu, use the ZOOM button to scroll.
2.
First Use
2.1 Inserting The Memory Card
To store your photos and videos insert an SD memory card. When battery is low, media
stored on the memory card will not be lost. Please insert the memory card by following
the steps below:
1.
Open the screen and push the SD card door towards the screen.
2.
Insert the memory card. Ensure that the metal contacts are inserted first.
Push the memory card down until you hear an audible click.
3.
Close the SD card door by pushing down and sliding back into place until
you hear a click.
1.
Open the SD card door
2.
Insert the memory card
To Next Page
Loading...
