to enter the ‘Self Timer’ submenu.
3. Press the ZOOM button to navigate the menu, and press the PHOTO
button to confirm your selected option (Off, 2 Seconds, 10 Seconds,
Double).
3.2.8 Photo Burst
This function allows to you capture consecutive photos with one click of the
PHOTO button.
1.
In Photo Mode press the MENU button.
2.
Select ‘Photo Burst’ using the ZOOM button and press the PHOTO button
to enter the ‘Photo Burst’ submenu.
3.
Press the ZOOM button to navigate the menu, and press the PHOTO
button to confirm your selected setting (Off, 3, 5, 10).
3.2.9 Sharpness
This function adjusts the visible detail of a photograph.
1.
In Photo Mode, press the MENU button.
2.
Select ‘Sharpness’ using the ZOOM button and press the PHOTO button
to enter the ‘Sharpness’ submenu.
3.
Press the ZOOM button to navigate the menu, and press the PHOTO
button to confirm how sharp you would like your photograph to be
(Hard, Normal, Soft).
3.2.10 Effect
This function sets the color filter effect of a photograph.
1.
In Photo Mode press the MENU button.
2.
Select ‘Effect’ using the UP or DOWN buttons and press the PHOTO
button to enter the ‘Color Filter’ submenu.
3.
Press the ZOOM button to navigate the menu, and press the PHOTO
button to confirm your selected filter (Normal, B&W, Sepia, Negative,
Red, Green, Blue).
3.2.11 Date/Time Stamp
This function adds a date/time stamp to your photographs.
1.
In Photo Mode press the MENU button.
2.
Select ‘Date Stamp’ using the ZOOM button and press the PHOTO button
to enter the ‘Date Stamp’ submenu.
3.
Press the ZOOM button to navigate the menu and the PHOTO button
for your selected setting (Off, Date, Date and Time). Section 3.3.4
explains how to set the time & date on your camcorder.
Note that once a date/time stamp is captured on a photograph, it
cannot be removed.
To Next Page
Loading...
