3.2.12 Photo Stabilization
This function enables photo capture in high speed and low-light by electronically
minimizing motion blur and reducing camera shake.
1.
In Photo Mode press the MENU button.
2.
Select ‘Stabilizer’ using the ZOOM button and press the PHOTO button
to enter the ‘Stabilizer’ submenu.
3.
Press the ZOOM button to navigate the menu, and press the PHOTO button
to confirm your selected option (Off, On).
3.2.13 Scene Modes
This function adjusts the camera’s settings to predetermined values that
will produce the best image for that selected scene.
1.
In Photo Mode press the MENU button.
2.
Select ‘Scene Modes’ using the ZOOM button and press the PHOTO
button to enter the ‘Scene Modes’ submenu.
3.
Press the ZOOM button to navigate the menu, and press the PHOTO
button to confirm your selected option (Auto, Landscape, Portrait,
Sport, Flower, Beach, Aquarium, Snow, Sunset, Night Scene,
Fireworks).
3.2.14 Face Detection
This function allows you to set your camera to detect faces in a scene and
adjust your camera's setting for the most optimal picture. You can also
enable your camera to capture a photo once a smile is detected on the
faces in a scene.
1.
In Photo Mode press the MENU button.
2.
Select ‘Face Detection’ using the ZOOM button and press the
PHOTO button to enter the ‘Face Detection’ submenu.
3.
Press the ZOOM button to navigate the menu, and press the PHOTO
button to confirm your selected option (Off, On, Smile Detect). The On
setting will enable Face Detection. The Smile Detect setting will enable
your camera to capture a photo once a smile is detected on the faces
in a scene.
3.2.15 Time Lapse
This function allows you to capture a long sequence of events in a much shorter
time period. This specific setting will determine how often an image is
automatically captured.
1.
In Photo Mode, press the MENU button.
2.
Select ‘Time Lapse’ using the ZOOM button and press the PHOTO
button to enter the ‘Time Lapse’ submenu.
To Next Page
Loading...
