4.
To remove the memory card, simply push in and the card will eject back
out.
2.4
Charging the Battery
Connect your camera to the included AC adaptor with the USB cable
provided for charging. Insert the small end of the USB plug into the camera’s
port under the battery door, and the larger end in to the included AC adaptor.
While charging the LED indicator light will light up solid red, when finished
charging the light will turn off.
• Please format the memory card before using the camera
(Caution, this will erase all data on the card).
• Do not remove or insert the memory card when recording. It
may damage the card or cause data loss.
• Memory card rating must be Class 6 or above.
2. First Use
To Next Page
Loading...
