Minolta MND65 - Powering and Charging the Camera

10
2.4 Charging the Battery
Connect your camera to the included AC adaptor with the USB cable
provided for charging. Insert the small end of the USB plug into the camera’s
port under the USB port door, and the larger end in to the included AC
adaptor. While charging the camera with the camera turned off, the LED
indicator light will light up solid red, when finished charging the light will turn
off. While charging the camera with the camera powered on, the battery
symbol on the LCD screen will show as red.
2.5 Powering the Camera On/Off
Tap the POWER button once to power the camera on. To power the camera
off, press and hold the POWER button for 3 seconds.
If the camera’s battery is low, a “Low Power” message will display on the
screen and it will automatically shut down within a few seconds to prevent
memory corruption or loss.
2.6 Switching Modes
Press the MODE button to cycle between Photo, Video, and Playback
NOTE:
• Please format the memory card before using the camera
(Caution, this will erase all data on the card).
• Do not remove or insert the memory card when recording. It
may damage the card or cause data loss.
• Memory card rating must be Class 10 or above.
2. First Use