button to confirm your selected option (Sharp, Normal, Soft).
4.
Press the MODE button to exit the settings menu without making a
selection.
3.1.6
Flash
This function allows to change the flash settings.
1.
In Photo Mode press the MENU button.
2.
Select ‘Flash’ using the UP or DOWN buttons and press the OK button to
enter the ‘Flash’ menu.
3.
Use the UP or DOWN buttons to navigate the menu, and press the OK
button to confirm your selected option (Auto, Off, On).
4.
Press the MODE button to exit the settings menu without making a
selection.
3.1.7
ISO
This function adjusts the light sensitivity in your photograph.
1.
In Photo Mode press the MENU button.
2.
Select ‘ISO’ using the UP or DOWN buttons and press the OK button to
enter the ‘ISO’ menu.
3.
Press the UP or DOWN buttons to navigate the menu, and press the OK
button to confirm your selected option (Auto, 100, 200, 400, 800, 1600,
3200, 6400).
4.
Press the MODE button to exit the settings menu without making a
selection.
3.1.8
Time Stamp
This setting allows you to imprint a date & time onto your captured image
files. Once an image file is captured with the imprint, the imprint cannot be
removed.
1.
In Photo Mode press the MENU button.
2.
Select ‘Time Stamp’ using the UP or DOWN buttons and press the OK
button to turn the time stamp on or off. When On, a check mark will be
shown.
To Next Page
Loading...
