enter the ‘ISO’ menu.
3.
Press the UP or DOWN buttons to navigate the menu, and press the OK
button to confirm your selected option (ISO Auto, 100, 200, 400, 800,
1600, 3200, 6400).
4.
Press the MODE button to exit the settings menu without making a
selection.
3.2.9
Time Stamp
This setting allows you to imprint a date & time onto your captured image
files. Once an image file is captured with the imprint, the imprint cannot be
removed.
1.
In Interval Photo Mode press the MENU button.
2.
Select ‘Time Stamp’ using the UP or DOWN buttons and press the OK
button to turn the time stamp on or off. When On, a check mark will be
shown.
To Next Page
Loading...
