Minolta MND65 - Using Your Camera: Video Modes; Video Recording Settings

3. Using Your Camera
26
base the exposure setting on a very small area of the scene. Center metering
will use the light from the center of the LCD and the Multi setting measures the
light at several points on the screen.
1. In Self Timer Mode press the MENU button.
2. Select ‘Metering’ using the UP or DOWN buttons and press the OK button
to enter the ‘Metering’ menu.
3. Use the UP or DOWN buttons to navigate the menu, and press the OK
button to confirm your selected option (Multi, Center, Spot, Matrix).
4. Press the MODE button to exit the settings menu without making a
selection.
3.4.6 Sharpness
This function adjusts the visible detail of a photograph.
1. In Self Timer Mode press the MENU button.
2. Select ‘Sharpness’ using the UP or DOWN buttons and press the OK
button to enter the ‘Sharpness’ menu.
3. Use the UP or DOWN buttons to navigate the menu, and press the OK
button to confirm your selected option (Sharp, Normal, Soft).
4. Press the MODE button to exit the settings menu without making a
selection.
3.4.7 Flash
This function allows to change the flash settings.
1. In Self Timer Mode press the MENU button.
2. Select ‘Flash’ using the UP or DOWN buttons and press the OK button to
enter the ‘Flash’ menu.
3. Use the UP or DOWN buttons to navigate the menu, and press the OK
button to confirm your selected option (Auto, Off, On).
4. Press the MODE button to exit the settings menu without making a
selection.
3.4.8 ISO
This function adjusts the light sensitivity in your photograph.
1. In Self Timer Mode press the MENU button.
2. Select ‘ISO’ using the UP or DOWN buttons and press the OK button to
enter the ‘ISO’ menu.