button to confirm your selected option (Sharp, Normal, Soft).
4.
Press the MODE button to exit the settings menu without making a
selection.
3.5.6
Video Quality
The Video Quality function determines the level of compression the camera
uses when saving photos to a memory card.
1. In Video Mode press the MENU button.
2. Select ‘Video Quality’ using the UP or DOWN buttons and press the OK
button to enter the ‘Video Quality’ menu.
3. Use the UP or DOWN buttons to navigate the menu, and press the OK
button to confirm your selected option (Super Fine, Fine, Normal).
4. Press the MODE button to exit the settings menu without making a
selection.
3.5.7
Flash
This function allows to change the flash settings.
1.
In Video Mode press the MENU button.
2.
Select ‘Flash’ using the UP or DOWN buttons and press the OK button to
enter the ‘Flash’ menu.
3.
Use the UP or DOWN buttons to navigate the menu, and press the OK
button to confirm your selected option (Auto, Off, On).
4.
Press the MODE button to exit the settings menu without making a
selection.
3.5.8
ISO
This function adjusts the light sensitivity in your photograph.
1.
In Video Mode press the MENU button.
2.
Select ‘ISO’ using the UP or DOWN buttons and press the OK button to
enter the ‘ISO’ menu.
3.
Press the UP or DOWN buttons to navigate the menu, and press the OK
button to confirm your selected option (Auto, 100, 200, 400, 800, 1600,
3200, 6400).
4.
Press the MODE button to exit the settings menu without making a
selection.
To Next Page
Loading...
