button to enter the ‘Exposure’ menu.
3.
Use the UP or DOWN buttons to navigate the menu, and press the OK
button to confirm your selected option (-3, -2, -1, 0, +1, +2, +3).
4.
Press the MODE button to exit the settings menu without making a
selection.
3.8.5
Video Duration
This function allows you to set the length of the final time lapse video.
1.
In Time Lapse Mode press the MENU button.
2.
Select ‘Video Duration’ using the UP or DOWN buttons and press the OK
button to enter the ‘Video Duration’ menu.
3.
Use the UP or DOWN buttons to navigate the menu, and press the OK
button to confirm your selected option (Unlimited, 6 Seconds, 8 Seconds,
10 Seconds, 20 Seconds, 30 Seconds, 60 Seconds, 120 Seconds).
4.
Press the MODE button to exit the settings menu without making a
selection.
NOTE: By selecting ‘10 Seconds’ the time lapse will automatically
stop recording when the final video is 10 seconds long. The actual
length of time that it will take to record the 10 second video will
depend on the interval duration, see section 3.8.2.
3.8.6
Metering
Metering mode refers to the way in which a camera determines the appropriate
exposure (quantity of light reaching the camera lens). Spot metering will only
base the exposure setting on a very small area of the scene. Center metering
will use the light from the center of the LCD and the Multi setting measures the
light at several points on the screen.
1.
In Time Lapse Mode press the MENU button.
2.
Select ‘Metering’ using the UP or DOWN buttons and press the OK button
to enter the ‘Metering’ menu.
3.
Use the UP or DOWN buttons to navigate the menu, and press the OK
button to confirm your selected option (Multi, Center, Spot, Matrix).
4.
Press the MODE button to exit the settings menu without making a
selection.
To Next Page
Loading...
