Minolta ProShot MN53Z - Custom Settings

48
Settings under mode (unset state or
state after reset):
1. Turn the mode dial to select the
mode, and enter the setup screen, as
VKRZQLQWKH¿JXUHEHORZ
Select one capture mode to define CS .
Auto Mode
Save
Exit
2. As shown in the picture, press the
A
C
/
CA
button to select a capture
PRGHWKDW\RXZDQWWRGH¿QHDV
, and
press the
button to enter the shooting
screen.
3. As shown in the picture, press the
EXWWRQWRFRQ¿UPVHWWLQJRUWRH[LWZLWKRXW
setting by turning the mode dial.
Or
Rotate the mode dial to skip .
Go to setting CS mode.
Yes
For setting under other modes (use this
method to select a different custom
setting):
1. Select any mode or scene mode to be
stored.
2. Set your desired parameters in the
current mode.
Custom Settings
The user can store the frequently used shooting modes and parameters and switch to this
mode for quick adjustment.