Minolta ROKKOR - Normal Use and Operation; Zooming Operation

NORMAL USE
For usual zooming and focusing at the
va lu es indicated on the contro l dials, the
norma l/close changeover button must be
at its outer position so that the "N " on
it s shank is visible.
It can be moved to this position, if
from the "M" position by turning it
counterclockwise until the s ha ft of the
arrow is align ed with the red ine and
pulli ng it out as far as it w il go.
UN" position
-
,
+
z
2
r-
Zooming
Thi s is accompli shed by moving the
zooming
lever to the desired position.
Fo ca l l eng th values are indicated by
figures at the base of the lever
5