7776
TITLE IMPRINTING
You can choose an additional title for the entire roll of film (Filmstrip Title). Both the
filmstrip title and the frame title will be imprinted on the back of the print.
After the film has been rewound and the film-cassette
mark is blinking -
1.Press title to select the desired title.
• Each press of the title button changes the title code to the next
selection.
SETTING A FILMSTRIP TITLE
2.Set the title by pressing the shutter-release button all
the way down. The camera advances to write the IX
data on the film leader, then rewinds the film.
• Be sure to set the filmstrip title before removing the film.
• Once the filmstrip title is set, it can not be changed.
To Next Page
Loading...
