43
DATE IMPRINTING
42
DATE IMPRINTING
Setting the Date and Time
• This camera has an automatic calendar through the year 2030.
1. Turn the control dial to .
2. Press and hold the date/select button until the year
blinks in the data panel.
• Only the date will be displayed in the data panel.
3. Press the self-timer/ adjust button to change the
blinking item.
• Press and hold the self-timer/adjust button to change the value rapidly.
4. Press the date/select button to choose the next item
to adjust.
• The sequence is `YY → MM → DD → HH → MM.
• Time is displayed and imprinted in 24-hour format.
5. Repeat steps 3 and 4 until all items in the date/time
display are correct.
6. Press the date/select button until all items in the data
panel stop blinking.
2208_E 24/10/97 10:30 AM Page 42
To Next Page
Loading...
