Minolta X-300 - Page 20

M@ Winding mechanism check
(DPasition of sprocket claws
After winding, hold the winding lever and return the sprocket in the direction of the arrow, as
shown in Fig. 1. The sprocket claw positions should then be as illustrated.
BFig.1
Rai
(ZiReversion stop lever timing
Slowly turn the film advance lever while applying a load to the sprocket. The winding opera-
tion lever should disengage from the winding operation plate after (or at the same time) the
second step of the reversion stop lever begins to engage with the claw of the winding gear.
MIFig. 2
Winding operation plate Winding operation lever
Reversion stop lever
@ Check through the clearance
of the strap hanger screw.