Minolta X-7A - Rewinding and Unloading Film

REWINDING AND UNLOADING FILM
1. Press the rewind release on the
camera bottom.
2. Unfold the rewind crank and
turn it in the direction of the arrow
until the red bar in the Safe Load
Signal moves
out of the window to
the left . Near the end. you will feel
tension of the film increase then
completely disappear, and the
crank will then turn freely .
3. When you are certain that the
exposed film is completely rewound
into the cartridge, pull up on the
back-cover release knob to open the
back, then remove the film car-
tridge .
• Never open
the camera back when there is any red still visible
in the Safe Load Signal.
23