Minolta X-7A - Accessories; Motor Drive 1 and Auto Winder G

ACCESSORIES
32
MOTOR DRIVE 1 and AUTO WINDER G
With Motor Drive 1 attached, you can capture the action with single-frame
or continuous operation at either 2 or 3.5 frames per second. The comfortable
handgrip has two operating buttons, each with a Minolta "touch switch " ,
enabling
full viewfinder readout for either horizontal or vertical framing.
Auto Winder G lets you focus full attention on the creative aspects of
photography by freeing you from winding the film after each picture .
Continuous sequences up to 2 frames per second are also possible by holding
down the camera's operating button .
Both units are designed to attach quickly and easily to your X-7A without
access caps to remove or store. Their film -advance mechanisms stop auto -
matically at the end of the roll, and film can be easily loaded and unloaded
without removing the units .