Minolta Zoom 8 User Manual

7
2 Take the Minolta "8" reel out of the camera, and open
the film pressure plate, as illustrated in the picture.
3 Break the seal on the new film, and place it on the
feeding spool, (as illustrated) with side (1) facing up
Be careful not to insert the reel of new film with
the side (2) facing up.
4 Insert the film into the channel of the camera,
with
the emulsion mat side of the film toward
the lens .
Hold the reel fast so that the film does
not become loose.
(The film should follow the
course of the white line on the camera body.)
5 Make sure the film is inserted in the right channel.
Close the film pressure plate. Pressure plate
will
be locked firmly when the camera door is
closed.
6
Insert the end of the film into the slot of the
Minolta "8" reel, holding it so side number
(1) is towards you. ' Wind the film around a few
times to make sure it is tightly engaged.

Minolta Zoom 8 Specifications

General

Brand	Minolta
Model	Zoom 8
Category	Digital Camera
Language	English