PAGE 18
Operating Mint Plus
Put On a Cleaning Cloth
Set Mint Plus on its end and remove the
cleaning pad.
Attach a dry or wet cloth to the Multi-
Purpose cleaning pad.
Lay the removable pad on an open
cleaning cloth.
Attach cloth by tucking it into the
gripping strips on both sides.
See page 19 for the Pro-Clean Reservoir
Pad.
Re-attach the cleaning pad. Magnets will help
it snap back into place.
Caution: Make sure the cleaning
cloth does not drape into the middle channel
between the gripping strips as this could
impede sensor functions and safe operation.
4
To Next Page
Loading...