MinXray HF100 - Readjustment of Exposure Time; Exposure Time Adjustment Prerequisites; Exposure Time Measurement; Exposure Time Adjustment Procedure

7. Readjustment of exposure time
This adjustment has to be done after connect all of connectors completely.
Actual exposure is necessary.
Note 1: This adjustment requires that an exposure be made. Please observe all
radiation related safety precautions.
Check the exposure time by using an external exposure time meter such as
the VICTOREEN NERO.
X-ray unit setting: 82kV - 0.5 sec.
Adiustment: Exposure time is decreased by turning clockwise.
(VR6 on the M3108A PC board)
- 16 -