(Fig.2)
1. Unscrew battery cap in a counter-clockwise direction (6).
2. Insert a 9V battery into the battery compartment according to the correct polarity
as shown in Fig.2. The moment the battery touches the terminals, the indicator
will flash briefly (6). This means the polarity is correct. However, if no flash
occurs, this indicates wrong insertion or that the battery life is over. Please re-
insert the battery according to its correct polarity or exchange it for a new, fresh
battery. Change to a new, fresh battery when the red indicator is lid, as this
indicates " low battery " status.
1. Unscrew battery cap in a counter-clockwise direction (6).
2. Insert two 1.5V(AA) batteries into the battery compartment observing the correct
polarity. The moment the battery touches the terminals of the compartment, the
indicator will flash briefly . This means the polarity is correct. However, if no
flash occurs, this indicates wrong insertion or battery is dead. Please re-insert
the battery observing its correct polarity or change to a fresh battery.
HANDHELD WIRELESS MICROPHONE
Operating Manual
2. Battery Insertion
- 19 -
ACT-707HE
ACT-3H
To Next Page
Loading...
