Need help?Do you have a question about the Mipro MA-101 ACT and is the answer not in the manual?
Title page identifying the service manual for the MA-101 ACT wireless amplifier.
Lists the technical specifications of the MA-101 ACT amplifier, including frequency range, power output, and dimensions.
Provides an exploded view diagram and a list of components for the MA-101 ACT assembly.
Schematic detailing the wiring connections of the MA-101 ACT, showing component interconnections.
Diagram showing the functional blocks of the MA-101 ACT system and their interrelationships.
Detailed schematic of the main circuit for the MA-101 ACT, illustrating electronic components.
Details test setup, pre-set procedures, and measurement steps for the MA-101 ACT.
Reference list for parts used in circuit 1PA011B, including computer number and reference designator.
Reference list for parts used in circuit 1PA015A, including computer number and reference designator.
Reference list for parts used in circuit 1PR057A, including computer number and reference designator.
Lists capacitors and connectors for circuit 1PA011B, including value, quantity, and note.
Lists components for circuit 1PA015A, including computer number, reference, value, and quantity.
Lists capacitors C1-C35 for circuit 1PR057A, including value, quantity, and note.
General| Type | Portable PA System |
|---|---|
| Amplifier | Class D |
| Battery Type | Rechargeable lithium-ion |
| Battery Life/Operating Time | Up to 8 hours |
| Signal to Noise Ratio | > 70 dB |
| THD | <1% |
| Audio Inputs | 1 x 3.5mm jack |
| Audio Outputs | 1 x 3.5mm Jack |
| Wireless Microphone Options | Optional |
| Power Supply | AC 100-240V |
| Input Impedance | 10k Ohms |
| Power Supply (DC) | 12V |
| Speaker | 5" full-range |
To Next Page