To Next PageTo Next Page
Need help?Do you have a question about the Mipro MA-101 and is the answer not in the manual?
Identifies all external components of the MA-101 PA amplifier, including jacks, controls, and indicators.
Guides on using the MA-101 with wireless and wired microphones for clear audio output.
Details how to charge the internal rechargeable battery using the provided AC/DC adapter.
Explains how to connect audio devices like MP3 players or CD players to the auxiliary input.
Covers hand carrying, shoulder carrying, and mic stand mounting options for the MA-101.
Instructions for using a wired microphone with the amplifier's mic input jack.
How to connect the amplifier's line out to external amplifiers for increased power.
Step-by-step guide for accessing and replacing the internal rechargeable battery.
Lists detailed technical parameters of the PA amplifier, including frequency, power, and dimensions.
Identifies components of the VHF handheld wireless microphone, including grille and indicator.
How to properly insert AA batteries into the VHF handheld microphone compartment.
Operating instructions for the VHF handheld microphone, including power and signal indicators.
Identifies components of the UHF handheld wireless microphone, including grille and indicator.
How to properly insert AA batteries into the UHF handheld microphone compartment.
Operating instructions for the UHF handheld microphone, including power and signal indicators.
Identifies components of the VHF bodypack transmitter, including AF input and controls.
Operating instructions for the VHF bodypack transmitter, covering volume, gain, and power.
Details 4-pin input connection methods for microphones and guitars for the VHF transmitter.
Instructions on how to install AA batteries into the VHF bodypack transmitter.
Identifies components of the UHF bodypack transmitter, including AF input and controls.
Operating instructions for the UHF bodypack transmitter, covering volume, gain, and power.
Details 4-pin input connection methods for microphones and guitars for the UHF transmitter.
Instructions on how to install AA batteries into the UHF bodypack transmitter.
Legal requirements and methods for disposing of used batteries to protect the environment.
General| Battery Life | 8 hours |
|---|---|
| Amplifier | Class D |
| Operating Time | 8 hours |
| Charging Time | 4 hours |
| Signal to Noise Ratio | >80dB |
| THD | <1% |
| Audio Inputs | 1 x XLR, 1 x 1/4" Jack |
| Audio Outputs | 1/4" Jack |
| Power Supply | AC 100-240V |
| Battery Type | Li-ion |
| Frequency Range | UHF |
| Input Impedance | 10k Ohms |
