Mira Excel User Manual

1
These instructions are to be left with the user
Installation & User Guide
MIRA EXCEL
SHOWER CONTROL

Mira Excel Specifications

General

Finish	Chrome
Temperature Control	Thermostatic
Warranty	5 Years
Maximum Static Pressure	10 bar
Temperature Stability	±2°C
Mounting	Wall Mounted
Inlet Connections	15mm
Minimum Maintained Pressure (Gravity System)	0.1 bar
Approvals	WRAS
Water System Compatibility	Suitable for all systems, including gravity-fed (subject to minimum pressure)

Summary

IMPORTANT SAFETY INFORMATION

SPECIFICATIONS

1. Pressure Ranges

Details minimum, maximum, and static pressure limits for the shower control.

2. Temperature Control

Specifies the temperature control range and response to supply changes.

4. Flow Rates

INSTALLATION REQUIREMENTS

1. Back inlet supplies (rising or falling concealed pipework)

2. Exposed supplies (rising or falling surface pipework)

3. Solid and dry-lined walls

4. Stud Partitions and Shower Enclosures (Front Face)

5. Laminated Panels and Shower Enclosures (Rear Face)

CONTROL ASSEMBLY FITTING INSTRUCTIONS

REVERSED INLET CONNECTIONS

COMMISSIONING

1. Maximum temperature setting

Procedure for setting the maximum safe water temperature for the shower.

2. Maximum Temperature Settings for Reversed Inlet Connections

3. Temperature override button - disable

OPERATION

1. Excel and Excel B

FAULT DIAGNOSIS

MAINTENANCE

2. Cartridge assembly - renewal

3. Cartridge assembly 'O' seals/inlet strainers - renewal