EasyManua.ls Logo

Mira SELECT User Manual

Mira SELECT
40 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
1
MIRA SELECT
Installation and User Guide
THERMOSTATIC MIXER
These instructions must be left with the user.

Other manuals for Mira SELECT

Question and Answer IconNeed help?

Do you have a question about the Mira SELECT and is the answer not in the manual?

Mira SELECT Specifications

General IconGeneral
Showerhead TypeFixed
Minimum Maintained Pressure0.1 Bar
FinishChrome
Installation TypeWall Mounted
Warranty5 Years
Product TypeShower
Temperature ControlThermostatic
Inlet Connections15mm
Outlet Connection1/2 inch
Maximum Maintained Pressure5 bar
Pressure Requirement0.1 to 5 bar

Summary

Introduction

Patents and Design Registration

Details patents and design registration numbers for the product.

Safety Warnings

Pack Contents

Product Dimensions

Technical Specifications

Operating Parameters

Details operating pressures and temperature ranges for the thermostatic mixer.

Temperature Settings

Specifies recommended hot water supply temperatures and blend temperature ranges.

Connection Types

Outlines the required pipe connections for exposed and built-in mixers.

Flow Rate Performance

Installation Requirements

Installation Symbols Key

Explains the meaning of various symbols used in the installation diagrams.

Gravity Fed System Requirements

Outlines requirements for installing the shower with a gravity fed water system.

Gas Heated System Requirements

Details installation requirements for gas heated water systems.

Installation Requirements

Unvented Mains Pressure System Requirements

Specifies requirements for unvented mains pressure water systems.

Mains Pressurised System Requirements

Details requirements for mains pressurised instantaneous hot water systems.

Pumped System Requirements

Outlines installation requirements for pumped water systems.

Installation Guide

General Installation Guidelines

Provides general guidelines and compliance information for installing the shower.

Installation Methods

Exposed Mixer Installation Methods

Describes installation methods for the exposed model of the thermostatic mixer.

Built-in Mixer Installation Methods

Details installation methods for the built-in model of the thermostatic mixer.

Exposed Mixer Installation: Rear Entry

Exposed Mixer Installation: Rising/Falling Supplies

Built-in Mixer Installation: Solid Wall/Stud Partition (Brackets)

Built-in Mixer Installation: Solid Wall/Stud Partition (Rear Fixing)

Built-in Mixer Installation: Laminated Panel

Built-in Model Control Assembly

Reversed Inlet Supplies Correction

Exposed Model Inlet Reversal

Procedure for correcting reversed inlet connections for the exposed model.

Built-in Model Inlet Reversal

Procedure for correcting reversed inlet connections for the built-in model.

Commissioning and Temperature Setting

Maximum Temperature Setting

Guide to setting the maximum safe showering temperature.

Shower Operation Guide

Fault Diagnosis and Rectification

Maintenance Procedures

General Maintenance Advice

General advice on maintaining the thermostatic mixer for optimal performance.

Lubricant and Cleaning Instructions

Specifies suitable lubricants and cleaning methods for the mixer components.

In-service Test Guidance

Describes procedures for checking the continued satisfactory performance of the mixer.

Maintenance Flow Diagram

In-service Test Procedure

A visual guide detailing the steps for performing in-service tests.

Inlet Filter Maintenance: Exposed Models

Inlet Filter Maintenance: Built-in Models

Type 2 Valve Compliance

Application and Supply Conditions

Details approved applications and required supply conditions for Type 2 valves.

Spare Parts List: Exposed Model

Spare Parts List: Built-in Model

Customer Service and Support

Guarantee and Contact Information

Information on product guarantee, service, and how to contact customer support.

Related product manuals