EasyManua.ls Logo

Mira Select Flex User Manual

Mira Select Flex
33 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
1
MIRA SELECT FLEX
INSTALLATION AND USER GUIDE
THERMOSTATIC MIXER
These instructions must be left with the user.

Other manuals for Mira Select Flex

Question and Answer IconNeed help?

Do you have a question about the Mira Select Flex and is the answer not in the manual?

Mira Select Flex Specifications

General IconGeneral
Product TypeShower
Shower TypeElectric
Temperature ControlThermostatic
Inlet Fitting15mm compression
FinishChrome
Warranty5 years
Energy EfficiencyA Rated
Spray Patterns4

Summary

Introduction

Guarantee

Recommended Usage

Outlines suitable applications for the mixer based on pressure and fittings.

Safety Warnings

Provides crucial safety precautions for installation and use.

Patents and Design Registration

Lists patent and design registration numbers for the product.

Pack Contents

Specifications

Pressures

Details the maximum and minimum operating pressures for the mixer.

Temperatures

Specifies recommended and operating temperature ranges.

Thermostatic Shut-down

Explains the safety mechanism for supply failure.

Connections

Details the inlet and outlet connection types and standard configuration.

Flow Rates

Provides typical flow rate data based on system pressure.

Dimensions

Installation

Suitable Plumbing Systems

Describes compatible plumbing systems like gravity fed and mains pressure.

General Installation Advice

General installation advice, compliance, and precautions.

Exposed Thermostatic Mixers

Installing the Thermostatic Mixer

Step-by-step guide for installing exposed mixer.

Built-in Thermostatic Mixers

Solid Wall or Stud Partition Fixing using Rear Mountings

Installation method for built-in mixers into walls.

Control Assembly

Reversed Inlet Supplies

Exposed Models

Steps to correct reversed connections for exposed models.

Built-in Models

Steps to correct reversed connections for built-in models.

Operation

Commissioning

Exercising the Thermostat

Procedure to ensure the thermostat operates correctly.

Maximum Temperature Setting

Detailed steps for adjusting the maximum temperature limit.

Type 2 and Type 3 Valves

Application

Approved uses and permitted applications for Type 2 and Type 3 designations.

Supply Conditions

Required water supply pressures and temperatures for compliance.

Commissioning

Specific commissioning checks for Type 2 and Type 3 valves.

Maintenance

Maintenance Procedures

General Maintenance

Routine maintenance requirements and serviceable parts.

Planned Maintenance

Recommendations for preventative maintenance and log books.

Healthcare Maintenance

Specific considerations for healthcare installations and user safety.

Frequency of In-service Tests

Fault Diagnosis

Inlet Filters

Spare Parts

Customer Service

Related product manuals