Need help?Do you have a question about the Mira Montpellier and is the answer not in the manual?
General| Brand | Mira |
|---|---|
| Model | Montpellier |
| Category | Kitchen & Bath Fixtures |
| Language | English |
Defines the standard parameters for product operation and environment.
Guidelines for using chlorine-based disinfectants with the product.
Specifies the operational ranges and conditions for the shower control.
Details maximum and minimum pressure requirements and flow rates.
Specifies operating pressures for the 12" Rose model.
Illustrates flow rates across different pressure losses for various outputs.
Details temperature differential, optimum range, and safety limits.
Details inlet and outlet connector types and connection requirements.
Requirements for installing the shower with a gravity fed water system.
Requirements for installing the shower with a modulating gas water heater.
Requirements for installing the shower with an unvented, stored hot water cylinder.
Requirements for systems using instantaneous hot water via a tempering valve.
Requirements for installing the shower with an inlet pump (twin impeller).
Key considerations and general procedures for installing the shower control.
Detailed instructions for physically mounting and connecting the shower.
Continues the physical mounting and connection instructions for the shower.
Instructions for fitting a flow regulator to the diverter elbow outlet.
Procedure to ensure the thermostat is responsive before setting temperature.
How to adjust and limit the maximum blend temperature for safety.
Verifying correct operation, pressure, and temperature after installation.
Explains the control sequence for setting water temperature.
Addresses issues where only one temperature of water is delivered.
Troubleshoots problems with inconsistent or low water flow.
Identifies causes and solutions for a complete lack of water flow.
Explains reasons for changes in mixed water temperature over time.
Diagnoses issues with the preset or user-adjusted maximum temperature.
Addresses causes and solutions for leaks originating from the mixer body.
Troubleshooting for flow rates that are either too strong or too weak.
Overview of product care and the importance of regular servicing.
Strategies for preventative and precautionary maintenance.
Describes the process of testing performance during normal operation.
Recommendation for keeping records of tests and service work.
Details the six-monthly performance check procedure for the thermostat.
Step-by-step guide for removing, cleaning, and refitting the thermostatic cartridge.
Instructions for removing, cleaning, and refitting the checkvalves.
Steps for removing, cleaning, and refitting the strainers.
A comprehensive list of available spare parts for the Mira Montpellier.
Advice on initial checks and contacting customer services for assistance.
Provides contact details for customer service in different regions.
To Next Page
