To Next PageTo Next Page
Need help?Do you have a question about the Mirage IAXH090A and is the answer not in the manual?
General| Brand | Mirage |
|---|---|
| Model | IAXH090A |
| Category | Air Conditioner |
| Language | English |
Identifies components of the indoor unit for the air conditioner.
Identifies components of the outdoor unit for the air conditioner.
Explains the indicators and display functions on the air conditioner unit.
Lists and describes the buttons on the air conditioner's remote control.
Explains the icons displayed on the air conditioner's remote control.
Details the functions of various buttons on the remote controller.
Explains functions activated by pressing multiple buttons simultaneously.
Explains how to activate and use the 46°F heating mode.
Details how to enable and disable the child lock feature on the remote.
Explains how to switch between Celsius and Fahrenheit displays.
Provides a step-by-step guide for basic air conditioner operation.
Instructions for replacing batteries in the remote controller.
How to operate the unit without the remote controller.
Guides on how to clean the exterior surface of the indoor unit.
Step-by-step instructions for cleaning the air conditioner filter.
Checklists for inspecting the unit before and after the cooling/heating season.
Information regarding proper disposal of the unit and packaging.
Troubleshooting common issues like no remote signal or no action.
Analyzes and provides solutions for non-operation or temperature adjustment problems.
Explains causes and solutions for odors, vapor, and noises.
Lists error codes and their troubleshooting steps for abnormal status.
Safety guidelines for installing or relocating the air conditioner unit.
Safety rules and precautions for electrical connections and wiring.
Guidelines for proper grounding of the air conditioner unit.
Lists the necessary tools required for air conditioner installation.
Recommendations for choosing suitable locations for units.
Steps for choosing the appropriate installation location for the indoor unit.
Instructions for securely mounting the frame on the wall.
Guidance on drilling and preparing the wall hole for pipes.
How to route the outlet pipe from the indoor unit.
Steps for connecting the refrigerant pipes to the indoor unit.
Instructions for connecting and securing the drain hose.
Guidance on connecting the electrical wires to the indoor unit.
Detailed steps for connecting the power supply to the indoor unit.
How to bind the connection pipes, power cord, and drain hose.
Final steps for securely hanging the indoor unit on the wall frame.
How to select and fix the support for the outdoor unit.
Instructions for installing the drain joint on the outdoor unit.
Steps for placing and bolting the outdoor unit onto its support.
Guide to connecting refrigerant pipes between indoor and outdoor units.
Instructions for wiring the outdoor unit and connecting it to the indoor unit.
How to route and secure the pipes for the outdoor unit.
Steps for using a vacuum pump to remove air from the system.
Procedures for checking the system for refrigerant leaks.
A checklist of items to verify after the air conditioner is installed.
Steps for performing a test run to ensure normal operation.
Details standard, minimum, and maximum lengths for connection pipes.
Guidelines for adding refrigerant oil and charge amounts.
Table showing refrigerant charging amounts based on pipe diameter.
Step-by-step guide on how to properly expand the pipe ends.
Lists error codes and their troubleshooting steps for abnormal status.
