To Next PageTo Next PageWhat to do if my Mirage VENTUS ALPHA IVADH361A is not working?
If your Mirage Air Conditioner isn't working, first, check for a power failure and wait for the power to be restored. Ensure that the power is turned on. If the fuse is burned out, replace it. Also, the unit's 3-minute protection feature might be activated; wait three minutes after restarting the unit. Finally, check if the timer is activated, and if so, turn it off.
Why does my Mirage Air Conditioner start and stop frequently?
Your Mirage Air Conditioner might start and stop frequently due to several reasons. There could be too much or too little refrigerant in the system; check for leaks and recharge the system with refrigerant. Incompressible gas or moisture might have entered the system; evacuate and recharge the system with refrigerant. A system circuit could be blocked; determine which circuit is blocked and replace the malfunctioning piece of equipment. The compressor might be broken; replace the compressor. The voltage could be too high or too low; install a manostat to regulate the voltage.
How to improve poor heating performance of Mirage VENTUS ALPHA IVADH361A?
If your Mirage Air Conditioner has poor heating performance, consider these factors. If the outdoor temperature is extremely low, use an auxiliary heating device. Ensure that all doors and windows are closed during use to prevent cold air from entering. Low refrigerant levels due to a leak or long-term use can also cause this; check for leaks, reseal if necessary, and top off refrigerant.
General| Brand | Mirage |
|---|---|
| Model | VENTUS ALPHA IVADH361A |
| Category | Air Conditioner |
| Language | English |
Safety warnings and guidelines for operating the air conditioning unit.
Precautions to take before cleaning or maintaining the air conditioner.
Critical safety guidelines related to electrical connections and power supply.
Information on the air conditioner's circuit board fuse specifications.
Essential safety instructions for the proper installation of the air conditioner.
Notes regarding the use and handling of fluorinated greenhouse gases in the unit.
Guidelines for the environmentally correct disposal of electrical and electronic equipment.
Warning about the environmental dangers of improper disposal of the appliance.
Identification of indoor unit components and recommended operating conditions.
Description of unit features like leak detection and tips for energy efficiency.
Instructions for cleaning the indoor unit, air filter, and general maintenance.
Guidance on identifying and resolving common problems and safety precautions.
List of accessories packed with the indoor and outdoor units.
Detailed instructions, safety, requirements, and procedures for installing the indoor unit.
Instructions, requirements, and wiring for installing the electric auxiliary heat module.
Wiring diagrams for various electric auxiliary heat kit capacities.
Instructions for selecting location, installing drain joint, anchoring, and dimensions for the outdoor unit.
Procedures and notes for installing indoor and outdoor drainpipes, including pipe purchasing.
Safety, length/elevation guidelines, and connection steps for refrigerant piping.
Regulations, procedures for outdoor/indoor unit wiring, specific methods, and DIP switch settings.
Procedures for air evacuation and notes on adding refrigerant based on pipe length.
Steps for performing a test run and essential pre-test system checks.
