NV8500 family Digital Routers • User’s Guide 27
1. Introduction
Front Module Slots and Rear Connections
nectors for sending signals between two connected NV8576-Plus frames. For more information on
backplanes, see Backplanes
on page 29.
In the upper region, to the far left of the output backplanes are two additional backplanes. Each
backplane contains 4 DIN 1.0/2.3 coax connections that send signals to monitor cards. (See Figure
1-21 on page 28.) Likewise, in the lower region, to the far right of the input backplanes are two
more backplanes for monitor signals. In the middle region of the frame, are connections for system
and power functions, as shown in Figure 1-21 on page 28.
To Next Page
Loading...